SIMPLE HUEFORGE ONLY 2 COLOR
Project: shanks.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 126.54x160.19mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox White Transmission Distance: 10
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.72mm) swap to White for the rest.