This tile was created in Hueforge. There are two sizes 4x4 and 8x8.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA+ Jayo Blue Transmission Distance: 3.4
PLA Elegoo Grey Transmission Distance: 3.4
PLA Elegoo White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #27 (2.24mm) swap to Blue
At layer #31 (2.56mm) swap to Grey
At layer #36 (2.96mm) swap to White for the rest.