sehr gutes Profil alles passt gut zusammen 

KölscheJung

0.2mm layer, 4 walls, 50% infill

St!mpy

cover

20240604_175308_5acb1ae5-0605-4f8d-9bfa-677b149aa707.jpg

20240604_175418_6a6dbfa1-e41c-4779-b4fe-a29e10b96230.jpg

Bez názvu-1_73824b11-e8f9-4746-8e82-ce4351de3b0d.webp

plate_1.webp

plate_2.webp

plate_1.png

plate_2.png

I printed the stand from golden sickle filament, but the print profile is set to generic PLA. You can glue hangers for chains and bracelets to the rod at the desired height and position, I solved this with rubber bands for knitting bracelets, which are always on the rod under the hooks, so they prevent the hooks from sliding down the rod. The stick is printed in a horizontal position for shorter printing time and greater strength, but you can turn it vertically if you want. Plate 1: stand base 4 covers per base (all are the same) stand rod Plate 2: hooks - print 2x&nbsp;Printed without pads on a smooth printing plate.

This is a simple stand for chains and bracelets with storage space. &nbsp;

Jewelry stand

Global

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

Shark Pendant

Orange/Lime/Lemon Earrings

Strawberry earrings

Jewelry stand (statue)