IMPORTANT: The model can be scaled in X and Y but not Z. The preview in the slicer IS NOT the final result.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x133.39mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA BambuLab Sparkle Black Transmission Distance: 0.8
PLA BambuLab Basic Red Transmission Distance: 3.5
PLA BambuLab Glow Yellow Transmission Distance: 5
PLA Creality Ender White Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.