The Model is 90x125.9mm in size
You may print at higher layer heights below the Min Depth of 0.08mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Hatchbox White Transmission Distance: 10
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Scarlet Red
At layer #11 (0.96mm) swap to Orange
At layer #16 (1.2mm) swap to White for the rest.