Project: charmander evolution.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 90x127.18mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Hatchbox White Transmission Distance: 10
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #5 (0.48mm) swap to Scarlet Red
At layer #9 (0.8mm) swap to Orange
At layer #16 (1.2mm) swap to White for the rest.