Beach umbrella table tray + pole fastener
Beach umbrella table tray + pole fastener
Print Profile(1)
Description
To store your drinks or accessories on the beach, in the garden or on the balcony and keep them cool.
Features:
- 4 bottle holders with a diameter of 85mm
- Attachable frames in 2 different heights
- 4 hooks for bags, towels or clothes
- Fastener for mounting in your favorite hight. Or place it on the sun umbrella clutch.
- The diameter (for the pole) of the table tray is Ø38,7mm for Ø38mm poles.
If you have a smaller pole than you can screw in one of 3 adapter for poles in 19, 22 and 25mm.
Do you have a different diameter? Write it in the comments!
Should be printed in PETG or ASA!
Assembly instructions for the table tray:
- Just push the frames in the holes. Add some glue if needed.
Assembly instructions for the fastener:
- You need 2x M8 Nuts and 1x M8 screw with hexagon head in a length of minimum 65mm.
- Assemble the screw handle. Add some glue if needed.
- Put the first M8 Nut in the first opening and screw in the screw a little bit.
- Then add some super glue on the thread from the second nut and screw in the M8 screw.
- After that you could apply anti-slip tape to increase the grip and protect the paint from the pole.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
