Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 139.48x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA Printalot Plateado Transmission Distance: 0.6
PLA Smartfill Recycled White Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Army Red
At layer #8 (0.72mm) swap to Plateado
At layer #14 (1.2mm) swap to White for the rest.