Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 92.55x200mm in size
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 1.5mm and the Actual Depth is 1.5mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Basico Control3D Rojo Transmission Distance: 4
PLA Printalot Plateado Transmission Distance: 0.6
PLA Smartfill Recycled White Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Rojo
At layer #14 (1.2mm) swap to Plateado
At layer #15 (1.28mm) swap to White for the rest.