rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #13 (1.12mm) swap to Jade White
At layer #19 (1.6mm) swap to Red for the rest.
Do not Adjust Z axis it will ruin the print