Oh my goodness this is so cute. the plug was too tight to take back out, but I wasn't planning to use it as a bamk anyway.

SadLeviIsSad

0.2mm layer, 3 walls, 15% infill

PETG 0.4mm 放大到 130%列印 紙鈔也可以塞進去哈哈

PETG 0.4mm scaled up to 130% print, even banknotes can fit in, haha

rjworkshop2023

it's great! I used some grease for the screw because the first one got stuck

Dimarokk

Very Good model.. I printed with supports and now the inside is filled with supports and not able to get it out.. Overall good print..

NikNauf

Only issue I had with this was literally everything came up in I think either Chinese or Japanese when I loaded the file to Bambu Slicer.  I ignored this problem and left all the settings as is on the file.  I did reduce the size of the print though as I am sending it to a friend as a gift

KazzerK

user_402829394

Jorrrrroco

coco

cover

7ffebdd1d50e888d0e3cf1dbff9309b_e552ef4c-9a6d-444c-bdf8-a99dd102bb36.jpg

82e10de0228365a8b61c761d5d1d18e_e6289555-e3df-4631-ad8b-a0c2d52317fb.jpg

ff0e4d3607a35f208bdb22371a28d0c_068277f7-85f9-49e3-a915-88072f34be60.jpg

龙猫 (1)_561c50e9-2017-4c81-b41e-1d8e1ab32295.png

c9260f34c75d4c3daf0c154f7817f09_feb070ef-98f1-4572-a804-e8c5a0d2bcc5.png

龙猫 (2)_6e4040fd-ebf9-411c-a7f1-3bf8beb6b192.png

龙猫 (3)_39e442bf-c918-49fd-9918-16f99be2a6c1.png

龙猫 (4)_80897fe3-a313-4d09-8b68-00c3ed5036ab.png

cfcf367811d4dd3351aeb246f802de1_f91e33c4-d094-4375-96a5-bebf9ea2f911.webp

30f3c3a7bcae4ad763406ed6a00962b_b79b7f28-a8ac-4af0-b7e2-8b46965274e9.webp

plate_1.png

0.2层高手动支撑螺旋体填充样式15％填充率墙层3顶层5底层420mm裙边外墙速度60

0.2 layer heightManual supportsSpiral infill pattern15% infillWalls 3Top layers 5Bottom layers 420mm skirtOuter wall speed 60

龙猫家族 | 3D模型下载 | 创想云

描述：宫崎骏动画片里的龙猫，胖乎乎的肚子里装钱币超合适不过啦！不仅呆萌而且实用！在原模型的基础上进行内部掏空做为存钱罐，后顶部添加投币口，底部添加螺纹盖子可取出硬币。适用于直径26mm内，厚度3mm内的金属币。在兼顾强度的情况下单个存钱罐耗材约为150g左右。Description:My neighbor totoro in Hayao Miyazaki&#39;s cartoon is super suitable for holding coins in his chubby belly! Not only cute but also practical!Based on the original model, the interior is hollowed out to make a piggy bank, and a coin slot is added to the top of the back, and a screw lid is added to the bottom to remove the coin.It is suitable for metal coins with a diameter of 26 mm and a thickness of less than 3 mm.In the case of taking into account the strength, the consumables of a single piggy bank are about 150g.形容：宮崎駿の漫画に登場する私の隣人のトトロは、ぽっちゃりしたお腹にコインを入れるのに超適しています! 可愛いだけじゃ実用的!オリジナルモデルをベースに、内部をくり抜いて貯金箱を作り、背面上部にコイン入れ、底面にスクリュー蓋を追加してコインを取り外す。直径26mm、厚さ3mm未満の金属硬貨に適しています。強度を考慮すると、貯金箱1個分の消耗品は約150gです。&nbsp;

Description:Totoro from Hayao Miyazaki's animated film is perfectly suited to hold coins in his chubby belly! Not only cute but also practical!Based on the original model, the interior is hollowed out to make a piggy bank, a coin slot is added to the top of the back, and a screw lid is added to the bottom to remove the coin.It is suitable for metal coins with a diameter of 26 mm and a thickness of less than 3 mm.In the case of taking into account the strength, the consumables of a single piggy bank are about 150g.Description:Totoro from Hayao Miyazaki's animated film is perfectly suited to hold coins in his chubby belly! Not only cute but also practical!Based on the original model, the interior is hollowed out to make a piggy bank, a coin slot is added to the top of the back, and a screw lid is added to the bottom to remove the coin.It is suitable for metal coins with a diameter of 26 mm and a thickness of less than 3 mm.In the case of taking into account the strength, the consumables of a single piggy bank are about 150g.&nbsp;

Print Profile(1)

Description

Comment & Rating (7)

This remix is based on

License

Related Models

Piggy-Bank: Trevi Whishing Fountain

Safe V2.1 Mini | Vault | Money Bank | Piggy Bank

Baby Groot Head - Piggy Bank

"Print-in-place" Trolley-Bank

My Neighbor Totoro piggy bank龙猫存钱罐