Double Star Hunter License from the anime Hunter x Hunter! Designed to be 2mm thick (although I scaled it to 1.6mm thick with no issues).
The text is small so 0.2 Nozzle is heavily recommended!
Also 1 wall on top and bottom makes for easier reading of the small text, at least for silk PLA. Middle layers are solid yellow for some filament savings.
Settings I changed for this model.
Profile: 0.10mm High Quality 0.2mm Nozzle
Wall Generator: Arachne
Only One Wall on Top Surface: Yes
Only One Wall on First Layer: Yes
First Layer Line Width: 0.22mm
First Layer Speed: 20mm/s