工匠大师10发直龙爪马盖普风格外套
工匠10发直龙爪弹匣可直接插入,底部有卡扣,使劲按压后可稳固卡住(当然,有点难取)
适合平口蛋井,弹匣套插深100mm,短猫可直接使用;
其他装备,可将模型在bambu studio中,将y轴旋转10度后,拉伸z轴(不超过10%),并进行适当切割,切割完成后再将y轴旋转归零打印
The worker 10-round talon magazine can be inserted directly, and there is a buckle at the bottom. It can be firmly stuck after pressing hard (of course, it is a bit difficult to remove)
Suitable for flat magazine wells, the magazine cover is inserted into a depth of 100mm, and can be used directly on short lynx;
For other equipment, you can put the model in bambu studio, rotate the y-axis by 10 degrees, stretch the z-axis (no more than 10%), and cut it appropriately. After the cutting is completed, rotate the y-axis to zero for printing.