Fly Swatter Gun Card
Copyright Claim
Fly Swatter Gun Card
Boost
745
1294
484
Print Profile(10)
0.12mm layer, 4 walls, 15% infill
Designer
1.2 h
1 plate
0.2mm layer, 2 walls, 15% infill
56 min
1 plate
A1 Mini - 0.12mm layer, 4 walls, 15% infill
1.4 h
1 plate
Extended Tolerances, suited for PLA
55 min
1 plate
Click to see more
Boost
745
1294
484
8
2.9 k
3.1 k
Released
Description
Introducing the DIY Fly Swatter Gun, the ultimate weapon in your battle against mosquitoes. This 3D print model lets you build your own mosquito-swatting machine. Just snap the pieces together, no tools required! With a reach of 30cm, you'll have the upper hand in the mosquito-hunting game.
IMPORTANT: "min. 4 Wall loops" if the spring has infill pattern, it will not work
Comment & Rating (484)
All
Print Profile
0.12mm layer, 4 walls, 15% infill
some of the best fun with the little fella. highly recommend
2
Reply
Pretty cool gadget for the kids 😎👍
1
Reply
o
o
o
o
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
Just make sure to keep internal temperatures low when printing using PETG. lid open or chamber fan on
(Edited)
The designer has replied
0
Reply
That does look terrible, I have to admit I've never used the Engineering Plate. If you have the correct plate and the 0.4 nozzle selected, I have no idea what the problem is.
0
Reply
I think I figured it out as it happened on my PETG-CF as well. Internal Temps were getting too high. Just turning on Chamber Fan on 100% fixed it. I can remove or fix the review
0
Reply
I used Bambu Lab’s PLA material. It started out perfect except for being a little difficult to assemble. But after a day, it lost its elasticity and could hardly bounce out. 😰
The designer has replied
0
Reply
Thanks for sharing your experience! It's possible that storing the flutter gun while loaded contributed to the loss of elasticity in the PLA material. To maintain spring tension, try unloading it when not in use. Hope this helps!
0
Reply
Replying to @uhltimate
Yes, there should be no problem in the design. It is most likely caused by the characteristics of the PLA material.
But I have a suggestion, which is to provide a slot to hold the elastic part when it is idle to maintain its shape and spring tension (as marked by the blue line in the picture). 😀
0
Reply
The print profile is no longer public
Good fun!
The designer has replied
1
Reply
Thanks for reviewing, I appreciate the feedback.
0
Reply
Boosted
Print Profile
0.12mm layer, 4 walls, 15% infill
quick and easy
1
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
incroyable
1
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
excellent quality
1
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
works, fun print
1
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
speriamo che funzioni hehe
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld