Here is a Multi Language version of Toge Inumaki from Jujutsu Kaisen, if anybody wants another language just let me know.
I only printed the Original English Version and the German Version, but they should all print without any problems.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 167.38x200mmx2.5mm
It can be resized, just make sure that Z stays at 100%
Filaments Used:
PLA Geeetech Black Transmission Distance: 0.6
PLA Geeetech White Transmission Distance: 5
PLA Sunlu Red Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to White
At layer #21 (1.76mm) swap to Red (or any color you like) for the rest.