Venom Crest
Venom Crest
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can scale the X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.5
PLA BambuLab Basic Gray Transmission Distance: 3
PLA BambuLab Basic White Transmission Distance: 6
This print uses 4 unique filaments. Substitute to your own needs.
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #14 (1.2mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
