(in English)
This case integrates a 1.3" OLED and rotary encoder into a Raspberry Pi 3B case.
The connection with Raspberry Pi was referred from here.
https://github.com/seya128/Voron0.1_skirt_OLEDandRotaryEncoder
1.3 inch OLED
https://vi.aliexpress.com/item/1005003484018034.html?channel=twinner
Rotary encoder
https://vi.aliexpress.com/item/33039321968.html?spm=a2g0o.order_list.order_list_main.64.39b81802mtDJRT&gatewayAdapt=glo2vnm
Caution.
Individual OLEDs and encoders may have different hole positions, so please edit the STEP file to adjust.
Please use at your own risk as the temperature of the Raspberry Pi may increase.
(I will UPDATE so that the fan can be installed before summer arrives in my area)
I also made a mount to attach the Raspberry Pi case to the Ender3V2/S1 LCD stand together
https://www.thingiverse.com/thing:5846683
(in Japanease)
ラズベリーパイ3Bのケースに1.3インチのOLEDとロータリーエンコーダーを一体化するケースです。
ラズベリーパイとの接続はこちらを参考にしました。
https://github.com/seya128/Voron0.1_skirt_OLEDandRotaryEncoder
1.3インチOLED
https://vi.aliexpress.com/item/1005003484018034.html?channel=twinner
注意
OLEDやエンコーダーは個体差で穴の位置が違うことがあるのでSTEPファイルを編集して調整してください。ラズベリーパイの温度が上がる可能性があるので自己責任で使用してください。
OLEDやエンコーダーは個体差で穴の位置が違うことがあるのでSTEPファイルを編集して調整してください。
ラズベリーパイの温度が上がる可能性があるので自己責任で使用してください。
(私の地域の夏が来る前にファンを取り付けできるようにUPDATE予定です。)
Ender3V2/S1のLCDスタンドにラズベリーパイケースを取り付けるマウントも一緒に作成しています
https://www.thingiverse.com/thing:5846683
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%