A Floating Vinyl Shelf that holds your most valuable records high while blending seamlessly into the background, letting the real art shine! All with no hardware!

Wanted something subtle that wasn't $15CAD or more and required no additional hardware, so designed this! It fits slimmer and thicker records with no problem, although I may print with extra walls/infill if you are going to use it for a really heavy record. Mounted mine to the wall using 3M Command Medium Velcro Strips (4 per shelf)

Instructions:

1. Print each half of the vinyl shelf and allow time for each part to cool
2. Remove supports from model
   1. When removing support from male connector, remove any additional filament left on the underside
   2. In order to remove ALL of the support within the female side of the connector, you will need to use something rigid and small. I personally used the Alan Key included with my A1, but don't recommend that as a solution in the long run. Alternatively, you can print using normal supports (rather than the pre-set tree supports), but I found these equally as difficult to remove without pliers
3. Push the two halves together, ensuring no one side goes in too much further than the other side
4. That's it!