Get ready for Christmas with this simple Christmas tree fairy light holder. Easy to print. You can use what filament you want. Perfect fit with a cheap 2m/20led fairy light. You can hide the cables and the houseing of the flat battery in the base of the modell.
I used this lights from amazon but you can find on aliexpress too.
If you want to print this modell, you can use my 3mf file. It has the correct orientation and position for the max size. I'll appriciate you if you use the bambu handy for starting your print.
As a request, I made a star shape holder too. Maybe if you interested in, you can check it on the link. link
--------------------------
2023.11.01 edit…
Some people requesting that, so I made a version with a bigger base where you can hide 2*AA or 3*AA battery boxes and the unnecessary wire of the light. I have a battery box wich has the switch on the top of the box not on the side, so i made a clearance for this type of boxes too. I made the hook a slightly bigger, so you can mount easily that rope type lights (what you can see on the picture) or you can use a longer light (3m long works very well too) becouse you have more space on the hook to mount the wires. The 3mf file contain the correct and i think the only orientation what you can use to printig in the biggest possible size on a bambulab printer.
--------------------------
2023.11.03
For request i added for the 3*AA battery box the wire channel to the base front and i adjusted the orientation the modell because the X1 users can have issue with the starting routine goes into the modell's first layer.
Thanks!