This was one of my Patreon members request. If you have a request, want FREE *Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D

Instructions
Can be rescaled just remember not to change the Z axis.

Important The photo is of the 5 color version. The 5 color version uses brown under the yellow for more of a gold look. The 4 color version uses black under the yellow for more of a dark yellow look.

5 color

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4

PLA Overture Space Gray Transmission Distance: 1.4

PLA Overture White Transmission Distance: 4

PLA Overture Chocolate Transmission Distance: 0.2

PLA Elegoo Yellow Transmission Distance: 7.2

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #13 (1.12mm) swap to Space Gray

At layer #17 (1.44mm) swap to White

At layer #21 (1.76mm) swap to Chocolate

At layer #25 (2.08mm) swap to Yellow for the rest.

4 color

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #17 (1.44mm) swap to White
At layer #21 (1.76mm) swap to Black
At layer #25 (2.08mm) swap to Yellow for the rest.