Credits to Creator : https://www.instagram.com/mitnick.art/ & https://www.instagram.com/insanelyuseful/

Follow for more Content you'll like ;)

An angry Hulk is once again rampaging thorugh the city - so watch out - but move to safety with caution

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA White Transmission Distance: 6
This print uses 2 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White for the rest.