PLEASE READ CAREFULLY, thanks!

This is a remix, tune, cut and recolor of the sliding model from RTX_Nitrox.

The solid model WITHOUT any moving parts is here: https://makerworld.com/en/models/480816#profileId-392470

This model features a moving slide and trigger but DOES NOT SHOOT.

IMPORTANT! The RED you use is critical. If you use a red with high translucency, it won't look as good (ie. Kingroon). For the other colors, you may want to opt for silver or light gray and similarly a dark gray or black.

All the profiles are designed to print slowly for better quality and with a decent weight for prop feel. If you want to speed it up, by all means, but the quality will take a dive. All models have been specifically tuned for speed and specific parts have ironing, some parts have been slightly shaved for better fitment. If you download the model to tweak it yourself, please take care to note the “default” settings I've put so you can test and revert if needed.

• SPLIT: The BEST quality version. The pieces are individually plated with adaptive layer height, tuned support settings, etc.
• A1 MINI: This barely fits on the plate but it works. Again, designed to print slow. If you can stand it, go with “silent” mode for best effect.

For the SPLIT profile, you have an option to print the receiver (the part you hold) as split and glue, or as a single piece. It's up to you which one to choose… both will work equally well. Just choose one of the two plates. The A1 MINI profile does not have a single piece option as it just doesn't want to come out very well on that printer.

GLUE and a RUBBER BAND is required for assembly.

For assembly tips: https://makerworld.com/en/models/472639#profileId-382515 

As always, please rate and comment for feedback. Enjoy!