ATTENTION: if you don't like/have orange filament you can change during slicing with that you prefere, i posted some exemple

Project: onigiri.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 93.44x140mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Orange
At layer #16 (1.36mm) swap to White for the rest.