Project: tokyo tower.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x186.67mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 0.88mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #15 (0.56mm) swap to White
At layer #17 (0.72mm) swap to Orange for the rest.