Heute habe ich mein erstes HueForge-Bild erstellt und mit meinem Bambi Lab A1 ausgedruckt. Ich hoffe, euch gefällt die Datei genauso gut wie mir :) Viel Spaß beim Drucken!
Project: Songoku Gym.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x250mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #9 (0.8mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.