HueForge of: Stand for the flag, Kneel for the cross.
This print has a good amount of body and can be a lengthy print time.
After 5 or 6 layers I manualy turned on the “Ludicrous mode”. Cut the print time by at least 40% with no real loss to quality.
I used all Bambu Lab PLA filaments.
.04 Nozzle, First layer 0.16, all remaining layers 0.08
100% infill
Start with Black
Swap filament with Blue at layer 13
Swap filament with Red at layer 16
Swap filament with Jade White at layer 25