HueForge of: Stand for the flag, Kneel for the cross.

This print has a good amount of body and can be a lengthy print time.

After 5 or 6 layers I manualy turned on the “Ludicrous mode”. Cut the print time by at least 40% with no real loss to quality.

I used all Bambu Lab PLA filaments.

.04 Nozzle, First layer 0.16, all remaining layers 0.08

100% infill

Start with Black

Swap filament with Blue at layer 13

Swap filament with Red at layer 16

Swap filament with Jade White at layer 25