The key holder uses 6 colors so you have to use a little trick to print it with just one AMS.
Configure the colors like this when you send it to the printer.
The profile has two stops, the first at layer 14, in which you will have to insert 4 2*8mm magnets, then you can press continue.
The next pause is in layer 51, in which you will have to exchange the white color for yellow and the brown color for red.
![]() | ![]() |
If you want to stick the Super Mario logo on the non-personalized keychain, I have included it on plate 2.
The logo has 5 colors, so we will use the pause trick again, place the black in any of the color slots and in layer 6 change the color.
You can personalize this version to add your family's name or the text you want. For them, select the text_shape and click on edit text. If the text is out of place you can move it from the tool.
You can download the font from the following page:
https://www.dafont.com/es/super-mario-256.font
For the font to be available in bambu studio it is very important that you click on it together with shift and click on "install for all users". Once this is done, restart bambu studio and you will have that font available.
Since you probably only have one ams, you will have to organize the prints by color, you can unmark the keychains as printable or move them to another separate plate, but don't forget to pause on layer 23 to add the magnet.
![]() | ![]()
|
The princess has 5 colors, so we will have to use a trick again to make it look good.
Set the colors like the ones I put in the image. In layer 3 it will pause and then change black to blue.
-
El portallaves utiliza 6 colores por lo que tendrás que usar un pequeño truco para imprimirlo con un solo AMS.
Configura los colores así cuando lo envíes a la impresora.
El perfil tiene dos paradas, la primera en la capa 14, en el que tendrás que insertar 4 imanes de 2*8mm, luego podrás presionar continuar.
La siguiente pausa es en la capa 51, en la que tendrás que cambiar el color blanco por amarillo y el color marrón por rojo.
![]() | ![]() |
Si quieres pegar el logo del supermario en el portallaveros no personalizado, lo he incluido en el plato 2.
El logo tiene 5 colores, por lo que volveremos a usar el truco de la pausa, coloca el negro en cualquier de los slots de colores y en la capa 6 cambia el color.
Puedes personalizar esta versión para aádir el nombre de tu familia o lo que tu prefieras. Para ello, selecciona text_shape y pulsa editar texto. Si el texto se descoloca, puedes moverlo con bambu studio.
Puedes descargar la fuente de la siguiente pagina:
https://www.dafont.com/es/super-mario-256.font
Para que la fuente esté disponible en bambu studio es muy importante que pulses shift + click y selecciones "instalar para todos los usuarios". Una vez hecho esto, reinicia bambu studio y tendrás esa fuente disponible.
Dado que seguramente solo tengas un ams, tendrás que organizar las impresiones por colores, puedes desmarcar los llaveros como imprimibles o moverlos a otro plato independiente, pero no olvides poner una pausa en la capa 23 para añadir el iman.
![]() | ![]()
|
La princesa tiene 5 colores, por lo que tendrremos que usar de nuevo un truco para que quede bien.
Configura los colores como los que pongo en la imagen. En la capa 3 relizará una pausa y entonces cambia el negro por el azul.