Transforming Fidget Ball Mini by macjfll

macjfll

Toys & Games>Other Toys & Games

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

17.6 h

1 plate

4.6(13)

0.2mm layer, 2 walls, 15% infill

Designer

16.1 h

1 plate

4.2(14)

Boost

269

428

712

266

Released

Description

This is a mini version of my Transforming Fidget Ball which can be printed on the a1 mini and requires a lot less filament.

Comment & Rating (41)

@user_615012952

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice

(Edited)

@user_633260601

does this require supports? I tried one and the supports basically made it solid.

@phill8879

Replying to @user_633260601 :

For me the supports came off without any real issues but I did need to use plyers for the harder parts.

@danhstevens

Not good. print was fused together and didn’t stretch. Took 17 hours to print and another hour to take off the supports. Also used a TON of fiiment. Super 🙁.

@Fatiyar

Print Profile

0.2mm layer, 2 walls, 15% infill

it printed fine with Esun pla+ Would recommend removing supports hot and fresh

@ThatBurga

Print Profile

0.2mm layer, 2 walls, 15% infill

very cool balls

@droolbaby69

Print Profile

0.2mm layer, 2 walls, 15% infill

fun to fidget.

@Nate_the_great

Very cool with multi color filament

@finnwii3d

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design. print profile supports hard to take off.

@n3ur0m4n

Boosted

Wonderful printed with 0.2mm nozzle at 50% on my A1 Mini

@n3ur0m4n

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very good print with my A1 Mini at 50% scale (0.2mm nozzle)

(Edited)

@xI_AM_AFRICAx

Print Profile

0.2mm layer, 2 walls, 15% infill

Pretty cool design. The supports were pretty brutal to remove, ultimately leading to a spot or two coming off with them upon removal, but its not overly noticeable. Would recommend using a PLA support spool for this print if possible.