An articulated Octopus with a skull forehead and with lightly snapping joints. Just bend them until they hold their position. This is a variation of the uploaded Octopus design on my profile and has a more grim look and feel.

Attention: I recommend downloading this project and manage your flushing volume as you prefer if you print this model in multicolor. I also recommend placing additional “Filament purge” objects on the plate if possible to minimize waste. Keep in mind that white needs a lot of flushing to keep it clear on the print.

This model is: PRINT IN PLACE - NO SUPPORTS

Testprints:

P1P with a 0.4mm nozzle printed in single color at 100% size

P1P with a 0.4mm nozzle printed in multicolor at 100% size

A1 Mini with a 0.4mm nozzle printed in multicolor at 80 % size

Model is tested 100% - 80%. Please make sure your buildplate is clean and levelled. Also make sure your filaments are calibrated.

This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission.

If you want to sell your 3D-printed Neopyx3D designs you need a Neopyx3D - Vendor membership via Patreon:

https://www.patreon.com/Neopyx3D

Recommended Main Settings:

Layer height: 0.16
Infill: 15 % Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: No-brim (Brim optional if you have adhesion issues)
Printing Temperature and Cooling: depends on filament