HY-01 Wireless Mouse by HaHa

HaHa

Hobby & DIY>Electronics

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 5% infill

Designer

2.9 h

1 plate

3.0(2)

Boost

Released

Description

这款3D打印鼠标仅有底座和外壳两个部分，打印简单，握持手感舒适。

This 3D printing mouse only has two parts: the base and the shell, making it easy to print and comfortable to hold.

具体安装步骤如下：

The specific installation steps are as follows:

1、安装开关及透明片、鼠标滚轮、芯片底板和导电片

Install switches and transparent sheets、mouse wheel、chip substrate and conductive sheet

2、安装上盖，拧上3颗螺丝

Press the top cover and tighten three screws

3、安装电池仓盖和鼠标脚垫

Install the battery compartment cover and mouse foot pad

欢迎大家打印不同配色，展示在我的评论区。

Welcome everyone to experiment with different color combinations and showcase them in my comment section.

注：打印底座时，在底座和上盖接缝处出现的小孔属于设计范围内，不影响正常使用。

Note: When printing the base, the small holes that appear at the joint between the base and the upper cover are within the design range and do not affect normal use.

2024年6月23日更新修改

Updated on June 23, 2024

1、模型增加分隔缝，优化鼠标按压手感。

1. Add dividers to the model and optimize the feel of mouse pressing.

2、鼠标底部增加型号印字。

2. Add model printing at the bottom of the mouse.

3、优化模型可变层高，使模型的弧度部分打印更细腻。

3. Optimize the variable layer height of the model to make the curved part of the model print more finely.

4、丰富配色展示图，供下载时参考。

4. Rich color display images for reference when downloading.

mouse

wireless mouse

Bill of Materials

Bambu parts

Wireless Mouse Components Kit (1pcs)-002

MH002

× 1

Purchase from Bambu Store

Comment & Rating (9)

@user_1791757260

Boosted

pretty cool, Im reslicing it to add fuzzy skin to the sides for better grip but the normal one came out great

The designer has replied

@HaHa

Good idea, looking forward to your printing effect.

@sam.millett

This mouse looks beautiful, but the design places an extremely weak (two-wall) join right at the point of most common flex (the left and right buttons). Additionally, the steep overhangs soon afterwards in this area easily result in poor surface quality without a lot of cooling... which further exacerbates the weakness, as layers are hit with cooling resulting in poor layer adhesion. This is not good design for 3D printing - two of my prints failed within an hour of construction, even with adjusted settings to increase strength. Others may last longer, but this is likely to be an early failure point for most prints. Having said all that, I really love your design aesthetic (I picked this mouse out of the hundreds in the competition), and will look forward to future designs. Please keep going!

The designer has replied

@HaHa

Thank you for your love and support. I will continue to improve my design based on your feedback. If possible, you can include pictures in your message so that I can better understand the areas of model improvement you mentioned. A better design cannot be achieved without the advice of someone as serious as you. Thank you again.

@Laskco

Print Profile

0.2mm layer, 2 walls, 5% infill

The light sensor and the power switch indents are not deep enough for the board to properly sit.

The designer has replied

@HaHa

After seeing your comment, I rechecked my model and there is no problem with the model,the light sensor and the power switch indents are deep enough.Suggest checking the installation direction of light sensor and the power switch，If the installation is incorrect in the up and down directions, it can cause the board to properly sit.Please refer to the detailed installation and usage tutorial for Bambu part MH002 in the part packaging. I have uploaded a picture of the installed part for your reference, hoping it can be helpful to you.

@Excalibur55

Print Profile

0.2mm layer, 2 walls, 5% infill

exelent!

@woohng

Boosted

已助力，希望你也帮我助力一下，谢谢

@woohng

Boosted

已助力，希望你也帮我助力一下

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.