Thing Apple Watch Remixed by makersark3d

Remixed by

makersark3d

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

3.8 h

1 plate

4.9(20)

Boost

170

121

Released

Description

Apple watch charger stand

Comment & Rating (21)

@delco4life

Print Profile

0.2mm layer, 2 walls, 15% infill

not sure if the supports were necessary and the cord groove could be tighter but all in all it’s a great model

@rogerknight

Printed fine without supports

@jamie.whitt

Print Profile

0.2mm layer, 2 walls, 15% infill

Print quality is great. The recess for the Apple Watch charger is snug but not excessively tight so it’s easy enough to remove when you want but not so loose the charger detaches when you pull your watch off. No additional glue/magnets needed.

(Edited)

@Martin2580

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect

@rogerknight

Print Profile

0.2mm layer, 2 walls, 15% infill

File printed and worked to charge my Apple Watch Ultra. Printed with 0.6 nozzle using defaullt settings in BL PLA Basic without supports

@jomba79

Print Profile

0.2mm layer, 2 walls, 15% infill

@holtmann.heiko

Print Profile

0.2mm layer, 2 walls, 15% infill

@frshbydesign

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1561061287

Print Profile

0.2mm layer, 2 walls, 15% infill

very cool could have had bigger notches for cable I used a small piece of double sided sticky tape to hold on

@LukiusBorg

Print Profile

0.2mm layer, 2 walls, 15% infill

wonderful

@TheSonic

Print Profile

0.2mm layer, 2 walls, 15% infill

Läßt sich super drucken und sieht stylisch aus. Nur das Kabel hält nicht so gut in der Aussparung. Da wäre es besser ein paar mehr "Halterungen" in der Kabelführung einzubauen