Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mmx2mm
It can be resized, just make sure that Z stays at 100%
Filaments Used:
PLA Geeetech Black Transmission Distance: 0.6
PLA+ Sunlu Gray Transmission Distance: 2
PLA Geeetech White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #20 (1.68mm) swap to White for the rest.