Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 135x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smartfil marron Transmission Distance: 5
PLA smatfil amarillo Transmission Distance: 5.8
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with negro
At layer #7 (0.64mm) swap to marron
At layer #10 (0.88mm) swap to amarillo
At layer #13 (1.12mm) swap to White for the rest.