One Piece Triptych - Episodes 17 - 68 - 316

All three peices have exactly the same colour assignment and layer heights. You can print one separately for display, or all three together form a larger image.

The rest of my Manga / Anime Hueforge's can be found here:
https://makerworld.com/@CanadianGamer/collections/1363776

-----------------------------------

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

Something that Bambu has done in the last update has made hueforge designs give a floating regions error. You can ignore this error.

In my print profile I have used a height range modifier (HRM), which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 3
PLA BambuLab Matte Dark Brown Transmission Distance: 2.1
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Blue
At layer #11 (0.96mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Dark Brown
At layer #14 (1.2mm) swap to Marine Blue
At layer #16 (1.36mm) swap to Silver
At layer #19 (1.6mm) swap to Latte Brown
At layer #22 (1.84mm) swap to Jade White for the rest.