Luffy Clock
Print Profile(1)
Description
3D MODEL DESCRIPTION
Onepiace luffy clock printed in color, the color change of the printer can also be used,
it does not require AMS or MMU,
in the slicer program set the color change to the recommended height.
add a negative cylinder(8mm) to the Centre of the clock to create the correct size hole for your movement or alternatively drill the required size hole.
3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Red
At layer #3 (0.32mm) swap to Black
At layer #9 (0.8mm) swap to Blue
At layer #10 (0.88mm) swap to Orange
At layer #13 (1.12mm) swap to White for the rest.
if you want to change the color of the numbers and border make another color change
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)