Art credit to Sandi Pramana :: Behance

Hueforge Describe File

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x262.57mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Silver Transmission Distance: 0.5
PETG JAYO White Transmission Distance: 4
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Silver
At layer #20 (1.68mm) swap to White for the rest.

This was printed on an A1 Mini with a 0.4 nozzle and AMS (although the print can be paused with added gcode to swap the colors manually). I hope you enjoy the print as much as I did.