[unFOLD] iPad/Tablet Foldable Stand Print in Place by 5El3

5El3

Household>Office

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

4.6 h

1 plate

4.8(4)

Boost

Released

Description

unFOLD Adjustable Tablet Stand

Overview:

Introducing unFOLD, the ultimate tablet stand designed for convenience, durability, and versatility. This print-in-place model requires no assembly or additional tools, making it perfect for anyone looking to streamline their workspace or enjoy hands-free tablet use.

Key Features:

Print-in-Place Design: unFOLD prints as a single piece, eliminating the need for assembly, additional tools or non-3D printed parts.
Adjustable Angle: Easily adjust unFOLD to find the ideal position for watching videos, reading, or drawing on your tablet.
Compact Size: unFOLD is designed to be compact, saving space on your desk or in your bag.
Universal Fit: Capable of securely holding both smaller and larger tablets, including the iPad Pro 12.9 inch, in both horizontal and vertical orientations.
Overengineered Design: Built with extra strength and durability in mind, ensuring unFOLD withstands daily use and supports your device reliably.

Ideal Print Settings:

Print Quality:
- Walls: 3 walls
- Infill: At least 15% gyroid pattern for optimal strength and weight balance.
Support: Supports are required to ensure proper printing of the adjustable mechanisms and stability.

Print the robust, adjustable unFOLD tablet stand and enhance your tablet experience with a model that combines functionality, durability, and ease of use. Perfect for any 3D printing enthusiast or tablet user!

Comment & Rating (6)

@user_3840935634

Print Profile

0.2mm layer, 3 walls, 15% infill

Came out pristine. It's absolutely beautiful, thank you! One suggestion would be to make the bottom lip a bit wider so as to accomodate devices with cases.

@wszqmrg4vk

Print Profile

0.2mm layer, 3 walls, 15% infill

Great design however the hinge fused when printed in ABS- will try again with a different brand of ABS

The designer has replied

@5el3

APS is a bit of overkill in my opinion, but it prints well with PETG.

@PikaDesign

Boosted

Very well constructed. Print perfect. Function perfect.

@user_273290691

Print Profile

0.2mm layer, 3 walls, 15% infill

Works, well designed, smaller than I expected, my fault for not checking.

@naitheb

Print Profile

0.2mm layer, 3 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.