Concert of 29/05/2024 at Milano Idays of Metallica. Nice souvenir idea for a great show.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x184.92mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 4mm and the Actual Depth is 3.1mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #11 (0.96mm) swap to Silver
At layer #21 (1.76mm) swap to Jade White for the rest.