I'm thinking about making a comic book of the ninja turtles. In in the Utrom's detonate a bomb and level New York. The turtles are trying to figure out what to do next and things move in a different direction from the 80's cartoon series.

Here is Rafael, who has taken it upon himself to hunt down the remaining Utroms and well…do what Raph does best. 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 199.99x109.37mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2mm and the Actual Depth is 2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.9PLA BambuLab Basic Red Transmission Distance: 4.1PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #5 (0.36mm) swap to RedAt layer #11 (0.6mm) swap to GrayAt layer #18 (0.88mm) swap to Jade White for the rest.