Project: Perla pr.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x236.83mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Eryone Black Transmission Distance: 5
PLA Eryone Grey Transmission Distance: 5
PLA Eryone Skin Transmission Distance: 5
PLA Eryone White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.64mm) swap to Grey
At layer #11 (1.04mm) swap to Skin
At layer #17 (1.52mm) swap to White for the rest.