This is 4 color Hueforge of planet Mercury.

Its part of my project to make all planets as a hueforge pictures, so i can hang them on my wall.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 177.92x180mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Latte Brown Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #12 (1.04mm) swap to Red
At layer #14 (1.2mm) swap to Latte Brown for the rest.