PetruziaOffice is my biggest 3d printed handwired mechanical keyboard (yet). The goals were to use the most of the usable pin in a pro micro controller but keeping the keyboard printable in a 22x22 cm printer plate.
The clip in the back is optimized for this tipe of promicro (the one with the type C connector): aliexpress
Here some handwire giudes:
https://docs.qmk.fm/hand_wire
https://www.masterzen.fr/2018/12/16/handwired-keyboard-build-log-part-1/
https://sachee.medium.com/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f
You will also need:
N. | Link | |
---|---|---|
x1 | UsbC “long” Pro Micro controller | Aliexpress |
x4 | M3 x 6mm screws | Aliexpress |
x4 | M3 threaded inserts | Aliexpress |
x4 | 10mm rubber feet | Aliexpress |
x5 | 2u Mx plate mount stabs | Aliexpress |
x75 | 1N4148 Diode | |
x75 | Mx mechanical switch on your choice | |
x1 | XDA profile MX keycaps | I used this: Aliexpress |