Transfoermers Destroy movie poster fridge magnet.

Measuring 65mm wide by 95mm high by 5mm deep

6 colour AMS print, using black, white, blue, ice blue, ash grey and red. Either Prints on one AMS with a pause to swap colours at layer 45 or a proflie is uploaded for users with 2 AMS units without a pause. 

PLEASE MAKE SURE YOU CHOOSE THE RIGHT PRINT PROFLIE FOR YOUR SETUP.

For Single AMS users

Start with your AMS loaded as follows

1 Black

2 White

3 Blue

4 Ice Blue

At the pause swap theblue for thegrey and the ice blue for the red as follows

1 Black

2 White

3 Ash Grey

4 Red

This needs 4x 8mm diameter by 2mm deep magnets, the magnets push into the model after printing, no need to pause.

NOTE - The magnets are designed to be a tight fit. The best way to insert them is to line up a magnet with a hole then place the model on a hard flat surface facing up, with the magnet on the hard surface, then press down firmly on the model. The magnet will snap into place. Repeat for each magnet.