Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 104.88x146.32mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Charcoal
At layer #17 (1.44mm) swap to Dark Blue
At layer #19 (1.6mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Lilac Purple
At layer #22 (1.84mm) swap to Grass Green
At layer #24 (2mm) swap to Jade White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.