For *exclusive* FREE models (including the Darth Vader pictured below) visit my Patreon in bio or http://patreon.com/JustBe3D) also if you are interested in members only models, or a commercial license to sell your physical prints of my models.
I included the 4 color verson as well as the 3 color verson. The 4 color version is the one pictured.
Can be rescaled just remember not to change the Z axis.
I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.
4 color
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Elegoo Gray Transmission Distance: 1.8
PLA Overture White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Space Gray
At layer #20 (1.68mm) swap to Gray
At layer #23 (1.92mm) swap to White for the rest.
3 color
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Space Gray
At layer #20 (1.68mm) swap to White for the rest..
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.