I have made many useful accessories here for my Ikea Skadis decoy wall.
Some without support, some with support.
I made sure that as little material as possible was needed and that it would be an economical print.
Everything was printed on a neptune 3 Pro with the following settings:
Infill: 10%
Material: PLA
Layer: 0,21
Speed: 70mm/s
Temp: 210/65
My Other Holders are here: https://makerworld.com/en/models/487573
-------------------------------------------------------------------------------------------------------------------------------------------------------
Ich habe hier viele nützliches Zubehör, für meine Ikea Skadis Lockwand gemacht. Teilweise ohne Support, teilweise mit Support.
Ich habe drauf geachtet das so wenig Material wie möglich benötigt wird und es ein sparsamer Druck wird.
Gedruckt wurde alles auf einem Neptune 3 Pro mit folgenden Einstellungen:
Support: Wird oft für die Harken benötigt
Infill: 10%
Material: PLA
Layer: 0,21
Speed: 70mm/s
Temp: 210/65
Meine weiteren Halterungen hier: https://makerworld.com/en/models/487573