I printed this using Elegoo PLA+ Black, Elegoo PLA+ yellow and Elegoo PLA White. Based on your filament choice the result may vary. In the Hueforge program this is planned using the below filaments:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 150x177.51mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Pure Yellow Transmission Distance: 5
    PLA Sunlu Meta White Transmission Distance: 8
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (1.4mm) swap to Pure Yellow
    At layer #23 (1.96mm) swap to White for the rest.