Siberiantiger20

cover

Albedo Hueforge_c661d8c4-89ba-4395-ab75-7f22a8d7b9fe.webp

IMG_1708_743887b1-cdc2-47a0-823f-3eb2982e0673.jpg

plate_1.png

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Red Transmission Distance: 4 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Black Transmission Distance: 0.6 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Beige Transmission Distance: 8 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Gray Transmission Distance: 2 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filamentsSwap Instructions: &nbsp;&nbsp;&nbsp;&nbsp;Start with Red &nbsp;&nbsp;&nbsp;&nbsp;At layer #7 (0.64mm) swap to Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #8 (0.72mm) swap to Beige &nbsp;&nbsp;&nbsp;&nbsp;At layer #10 (0.88mm) swap to Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #16 (1.36mm) swap to Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #20 (1.68mm) swap to Jade White for the rest. &nbsp;

0.08mm layer, 2 walls, 15% infill

Wanted a better verson of Albedo for printing and found this and decided to make it.

Print Profile(1)

Description

Comment & Rating (8)

License

Related Models