Hi another model from me. This time I tried color pop with naruto.

The original Color of the Rasengang is Blue. You can change the gold to blue if you prefer. I wanted it in gold to see how it goes.

Other models are available on my page!

Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 0.3
PLA GREEETECH Gray Transmission Distance: 3.5
PLA Everfill Snowwhite Transmission Distance: 3
PLA Greeetech Silk Gold Transmission Distance: 2

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #10 (0.88mm) swap to White
At layer #13 (1.12mm) swap to Gold (Here you can change the Rasengang color, try with blue/red/ext.)
At layer #17 (1.44mm) swap to White for the rest.

To use it without AMS:

• Use the normal profile
• Slice the profile
• On the right put a pause at Layer 7, 10, 13 and 17
• This will Trigger a manual Pause at this Layer where you can then change the filament

Enjoy!

If you need an easy stand for the picture you can use this:

It only uses 17g filament and is printed in 37 minutes

https://makerworld.com/en/models/470314#profileId-379805

Created with Hueforge